11.4 SEAT, SEAT BELT AND ARM RESTS 11.4.1 SEAT WITH ADJUSTABLE SEAT BELT Pull lever (A), and slide the seat back or forth to any one of five positions and release the lever. Be sure the seat engages the slide rail notch. Turn the knob (B) clockwise or counterclockwise to adjust the seat to the operators weight. Pull up on the back rest (C) and move the cushion to one of the three positions. Pull lever (A) up, and slide the seat back or forth to any one of five positions and release the lever. Be sure the seat engages the slide rail notch. 11.4.2 SEAT WITH RETRACTABLE SEAT BELT Turn the knob (B) clockwise or counterclockwise to adjust the seat to the operators weight.
Pull up on the back rest (C) and move the cushion to one of the three positions. 11.4.3 SEAT BELT A WARNING Before driving the machine, adjust the seat and fasten the seat belt. Adjust the seat belt to fit snugly and low around the hips to lessen the chance and severity of injury in the event of an accident. Never wear the seat belt across the abdomen. A WARNING Do not use bleach, color dye or solvents on the seat belt webbing which may cause a severe loss of tensile strength. This could cause the webbing to break resulting in personal injury. It is recommended that the belt be cleaned only with warm water and a mild detergent.
To buckle, insert the tongue portion (A) of the buckle into the locking portion (B). To release, lift the top lever plate (C) on the locking portion of the buckle and pull the tongue plate out. Keep belts flat to avoid twisting and roping when not being used. Do not place heavy or sharp object on the belts. 2-13