11.5.5 BRAKE AND DECELERATOR PEDAL a WARNING Do not put your foot on this pedal unnecessarily. This pedal 0 overrides the engine speed control lever setting. Partial depression of the pedal decreases engine speed for smoother changes in machine direction and to ease the machine up to a load. Release the pedal to accelerate to the engine speed control lever setting. This pedal stops the machine when fully depressed. It also serves as a parking brake when the brake pedal lock is applied. 11.5.6 BRAKE PEDAL LOCK Whenever the machine is parked, always lock the brake pedal. A WARNING This lock 0 secures the right brake pedal in the applied position for parking the machine.
To lock the pedal, fully depress the pedal, push down on the lock and remove your foot from the pedal. To release the brake, depress the pedal. REMARK Release the lock before moving the machine. The brakes could burn or be damaged if the machine is driven with them applied. This lever controls all operation of the blade; blade raise, lower and float; right or left tilt and right and left angle. 11.57 BLADE CONTROL LEVER REMARK Holding the control lever in any position except HOLD or FLOAT for an extended period of time after the hydraulic cylinder rod has reached the limit of its travel will produce excessive heat in the hydraulic system which may affect equipment performance.
I I \/ / cmA 2-17