OPERATION 12.2.2 COLD WEATHER STARTING A WARNING Ether starting fluid is highly flammable. Follow the precautions printed on the ether cylinder. An explosion can result if sparks or flame contact the ether in the starting fluid cylinder or if you store the cylinder in an area with the temperature above 49°C (120°F). Observe the following precautions. Do not use the ether injector when the air temperature is above freezing. Do not smoke when using ether staring fluid. Do not store fluid containers in the operator’s compartment. Store the container in a cold, well venti- lated place. Keep the fluid cylinder out of reach of children. Do not breathe the hazardous ether vapor.
Do not let ether contact your skin, because it can cause frostbite. Never puncture the fluid container or put it into a fire. Dispose of empty container properly. For your safety, remove the ether container when welding, grind- ing, or using a torch on the machine. Follow the correct method for starting the engine. Before any starting attempt, check the ether cylinder to insure that a supply of starting fluid is available under pressure and the system is in working condition. Ether injection is controlled by a button type switch on the instrument panel. 2-32