Removal and Storage Removal CAUTION: Disconnect electric and/or hydraulic power and tag out if required before servicing or performing maintenance. 1. Disconnect spreader wire harness from chassis harness. 2. Unclip the spreader harness from the hitch and loop the harness around spreader frame. NOTE: It is recommended that two people lift the spreader for this removal 3. Lift Lock bar (A) and slide implement outwards. A 4. Lift away the implement. Storage 1. Wash spreader and allow to dry. 2. Apply dielectric grease on all the electrical connections to prevent corrosion. 3. Cover spreader and store. 16 LP69910 (12/07/2020) 3 CU FT GATOR FERTILIZER SPREADER