1.2. Engine Specifications DL06 Diesel Engine Safety Regulations & Specifications 10 Items Engine model DL06 Engine type Water-cooled, 4 cycle, In-line, Turbo charged & inter-cooled Combustion chamber type Direct injection type Cylinder liner type Replaceable dry liner Timing gear system Gear driven type No. of piston ring 2 compression ring, 1 oil ring No. of cylinder-bore x stroke (mm) 6 – 100 ×125 Total piston displacement (cc) 5,890 Compression ratio 17.4 :
1 Engine dimension (length x width x height) (mm) 1,069 x 815 x 1,164 Rotating direction (from flywheel) Counter clockwise Engine weight (kg) 560 Firing order 1 – 5 – 3 – 6 – 2 - 4 Fuel high pressure pump type Bosch CP3.3 fuel high pressure pump type Engine control type Electric control type (ECU) Injector type Multi – hole (8 x Ø0.136) Fuel injection pressure (kg/cm2) 250bar(operating pressure 1,600bar) Valve clearance Intake valve 0.3 Exhaust valve 0.4 Intake valve Open at 21° (B.T.D.C) Close at 33° (A.B.D.C) Exhaust valve Open at 56.2° (B.B.D.C) Close at 22.2° (A.T.D.C) Fuel filter type Full-flow (cartridge) Oil pressure (kg/cm2) at idle speed 1.5 ~ 3.0 at rated speed 3.0 ~ 5.5 Using lubrication oil ACEA-E5(API CI-4 class) Lubrication method Full forced pressure feed type Oil pump type Gear type driven by crankshaft Oil filter type Cartridge type Lubricating oil capacity (max./min.) (lit) 27 / 17 , 22 / 16 Oil cooler type Water cooled Hydraulic indicator Oil pressure unit Water pump Belt driven centrifugal type Cooling method Pressurized circulation Cooling water capacity(engine only) (lit) 10.6 Thermostat Type Wax pallet type Open at (° C) 71°C (82°C) Open wide at (° C) 90°C (95°C) Valve lift (mm) 10 (10)