2.3.27. Starter z The sliding-gear starter motor is flanged to the rear of the flywheel housing on the left-hand side. As parts of every engine overhaul, the starter pinion and ring gear should be cleaned with a brush dipped in fuel and then a coat of grease should be applied again. 24Vx4.5kW Battery terminal (+) M10 x Switch terminal (M5 x 0.8) Battery ground (-) M10 x 1.5 z Always protect starter motor against moisture. Circuit Solenoid Magnetic switch Motor Solenoid switch Battery terminal Always disconnect the battery earth cable before starting work on the IMPORTANT : electrical system. Connect up the earth cable last, as there is otherwise a risk.
DL06 Diesel Engine Technical Information 41