3.1.33. Fly wheel z Remove the flywheel fixing bolts, install the guide bolts and disassemble it. z The bolt removal is done by the reverse order of assembling and by the steps. 3.1.34. Piston z Remove the connecting rod cap bolts in the reverse order of assembling but do by the step of 1 and 2 same as the cylinder head bolt removal. z Disassemble the upper/lower of connecting rod caps by tapping lightly with urethane hammer, and remove the bearing z By pushing the connecting rod with wooden bar from the direction of oil pan toward cylinder head, disassemble the piston assembly.
z The disassembled piston assembly should be handled to prevent bumping each other, and stored as the cylinder's order. z In order for connecting rod cap not to be swapped, temporarily assemble to the corresponding connecting rod. DL06 Diesel Engine Disassembly and Reassembly of Major Components 66