F. Fuel Injection Quantity Control a. Starting Injection Quantity The injection quantity is determined based on the engine speed (NE) and water temperature while starting. 7XEVXMRK-RNIGXMSR5YERXMX] ;EXIV 8IQTIVEXYVI )RKMRI7TIIH 5) b. Transient Injection Quantity Correction When the changes in the accelerator opening are great during acceleration, the increase in fuel volume is delayed to inhibit the discharge of black smoke. -RNIGXMSR5YERXMX] 'LERKIMR%GGIPIVEXSV3TIRMRK -RNIGXMSR5YERXMX]EJXIV'SVVIGXMSR (IPE]8MQI 8MQI c. Basic Injection Quantity 5) ‡ This quantity is determined in accordance with the engine speed (NE) and the accelerator opening.
‡ Increasing the accelerator opening while the engine speed remains constant causes the injection quantity to increase. &EWMG-RNIGXMSR5YERXMX] %GGIPIVEXSV3TIRMRK )RKMRI7TIIH 5) -26-