INSTRUMENTS AND CONTROLS 5. COOLANT TEMPERATURE MONITOR 6. TORQUE CONVERTER OIL TEMPERATURE MONITOR 7. EMERGENCY STEERING OPERATION MONITOR This monitor indicates a rise in This monitor indicates a rise in the torque converter oil temperature. When the monitor lamp flashes, stop the machine and run the engine with no load at midrange speed until the green range of the temperature gauge lights. If the engine stops while the ma- chine is traveling or an abnormality occurs in the pump circuit, the oper- ator will be warned that the emergency steering is in operation. When flashing begins, stop the ma- chine immediately. the cooling water temperature.
When the monitor lamp flashes, run the engine with no load at mi- drange speed until the green range of the engine water temperature gauge lights. Sr Park the machine on level ground and check the monitor lamps. * Confirm that these monitor lamps light for about 3 seconds after turning the starting switch to ON. If any monitor lamp does not light, ask your Komatsu distributor to inspect that monitor lamp. w-02011 - 11 -