INSTRUMENTS AND CONTROLS 4. AFTERHEATING MONITOR 5. TRANSMISSION CUT-OFF SELECTOR PILOT LAMP 6. AIR PRESSURE GAUGE I 1 Redw Green Red When using APS (automatic priming system) in cold weather, and when starting, after the engine starts, the lamp will flash until the water temperature reaches 2O”C, informing you that afterheating has started. This lamp lights up when the transmission cut-off selector switch is turned to ON. * If the monitor lamp is ON and the left brake pedal is depressed, the transmission will be returned to neutral. This gauge indicates the air pres- sure in the air tank. The green range should be lighted during normal operation.
If the red range lights up during operations, the alarm buzzer will sound, the warning lamp will flash, and the air pressure monitor lamp will flash. If this happens, stop the machine, increase the engine speed and wait until the green range lights up. Sr If the air pressure drops even low,er, the parking brake will be automatically applied. W-02012 - 13-