INSTRUMENTS AND CONTROLS SWITCHES 1. TRANSMISSION CUT-OFF SELECTOR SWITCH This switch selects the operation of the left brake pedal. Normally, A If the machine has to be put this switch in ON position. @ OFF: started on a slope, always turn the transmission cut-off selec- tor switch to OFF and depress the left brake pedal. Then dep- ress the accelerator pedal while releasing the left brake pedal to start the machine off slowly. Acts as normal brake (like right brake pedal). @ ON: Acts as normal brake, but also switches transmission to NEUTRAL. * If the switch is at ON, the trans- mission cut-off selector pilot lamp will light up.
Put the switch to the desired po- sition according to working con- dition to make operation easy. - 16- ww -02014