INSTRUMENTS AND CONTROLS 8. BUCKET CONTROL LEVER 9. SAFETY LOCK Tilt This lever operates the bucket. * When the bucket control lever is pulled further from @ position, the lever is stopped in this posi- tion until bucket reaches the preset position of bucket positioner, and the lever is backed to hold position. This is used to lock the lift arm and bucket control levers. A When parking or leaving the machine, or when the perform- ing maintenance, always lower the bucket to the ground, put the work equipment levers in hold position and check that safety lock lever is locked. @ Tilt ( % 1 @Hold ( s ): The bucket is kept in the same position. @ Dump ( k’ 1 - 28 - W-04274