INSTRUMENTS AND CONTROLS OPERATOR’S SEAT RIGHT SIDE ARMREST The seat adjustment should be checked at the beginning of each shift and when operators change. Move lever (2) up, set the seat to the desired angle, and release the lever. 8: Seat angle adjustment The seat can be tilted up or down about 3”. C: Seat cushion adjustment Rotate grip (3) under the seat to adjust scale (4) on the cushion ad- justment to your own weight. (50 to 120 kg) D: Backrest adjustment Loosen bolts (I) to move the arm rest to the desired position, and tighten the bolts. Angie adjustment Loosen bolts (2) to move the armrest to the desired angle and tighten the bolts.
Height adjustment Pull lever (51, move the backrest to the best position and release the lever. The backrest can be set to 1 1 steps. A: Forward-backward adjustment Move lever (1) to the right, move the seat to the best position and release the lever. The seat can be moved forward or backward within a range of 140 mm in 7 stages. Move lever (6) upward, set the seat to the desired height and release the lever. The seat can be set within 50 mm. E: Seat height adjustment - 32 - w-01275