OPERATING YOUR MACHINE TO STOP THE ENGINE 3. Turn parking brake switch (4) to ON to apply the parking brake. 4. Operate the work equipment lever and lower the bucket to the ground, then lock the safety lock lever for work equipment lever. ON Run the engine at low idling speed for about 5 minutes to allow it to gradually cool down. * When the parking brake is applied, the transmission is auto- matically returned to neutral. A Stop the machine in a safe place on firm level ground. If the machine has to be stopped on a slope, put blocks under the wheels. In addition, dig the bucket into the ground to in- crease safety. Return starting switch (I) to the OFF position and remove the key.
OFF W-04283 -51 -