PERIODICAL REPLACEMENT OF SAFETY PARTS PERIODICAL REPLACEMENT OF SAFETY PARTS The users of our machine should carry out periodi- cal maintenance in order to ensure the working and op- eration safety. Those parts, as listed on the right, which are closely connected with safety, must be re- placed periodically so that the highest safety standard can be maintained. These parts with the passage of time have a great tendency to deteriorate in quality, and to wear ratter soar. Furthermore, their defective condition is difficult to detect during periodical maintenance.
These parts I Safety parts for periodic replacement Replacement Remarks interval I must, therefore, be replaced with new ones after a pre- determined service period even though there is no ap- parent abnormality. It goes without saying that if any abnormality should be found, these parts must be replaced or repaired even before the predetermined period expires. The periodical replacement is completely different from the replacement due to the claim against the guarantee by the manufacturer, so they must be treat- ed separately.
2 Rubber parts for power cluster Every year Replace with repair kit 3 Packings, seals, O-rings of steering cylinder Every 2 years 4 ) Rubber hose for steering cylinder) Every 2 years) 5 ) Fuel hose 1 Every~2 vearsr ~ ~ 6 Rubber parts for treadle valve Every year Replace with repair kit 7 Rubber parts for parking Every year Replace with brake spring cylinder repair kit 8 Rubber parts for slack adjuster Every year Replace with repair kit W-02550 -A - 73 -