. OPERATION EXPLANATION OF COMPONENTS 3 - 7 ENGINE COOLANT TEM PERATURE GAUGE s the coolant temperature. in the white range during operation, the normal. from the white range into the red range the machine immediately, run the engine This gauge (2) indicate When the indicator is coolant temperature is If the indicator moves during operation, stop ange ngine under no load at a midr ange speed, and wait for the indicator to go down to the white rang e. After starting the engine, w arm up i t until the indicator moves int o the white range.
TRANSMISSION OIL TE MPERATURE GAUGE tes the temperature of the transmission n the white range during operation, the oil from the white range into the red range This meter (3) indica lubricating oil. When the indicator is i temperature is normal. If the indicator moves ange during operation, stop the machine, run the engine under no load at a midrange speed, a nd wait for the indicator to g o the white range. FUEL GAUGE When the starting swit ch is turned ON, this meter ( 4) display s the amount of fuel remaini ng in the fuel tank. F indicates a full tank. When the indicator poin ts to E, it indicates that there is less th an 43 liters (11.35 US gal) re maining, so add fuel.
r finishing operations. Always fill the tank afte ENGINE COOLANT TEMPERATURE CAUTION LAMP This lamp (5) warns o coolant. If the lamp lights up, s load at a midrange spe ed, and wait for the indicator of the e ngine coolant temperature ga uge (2) to go down to the w hite rang e.