. OPERATION EXPLANATION OF COMPONENTS When the lamp lights up during operation, oil pressure is to low. GLOW SIGNAL 3 - 11 TRANSMISSION OIL TEMPERATURE This me ter (3) shows transmission lu brication oil temperature.The tempera ture is normal, if the needle remains in the green range es into the red range while while in operation. If the needle go operatin g, stop the machine and let th e engine idle with middle rpm and wai t until the needle drops to the CHARGE LAMP This lamp (4) indicates a malfunctio n of the alternator. When the This lam starting switch is turned ON, it will lig ht up, but it should go out as the eng ine speed rises. mp lights up during operatio elt tension.
If any abnorma LE (PAGE 3-116)". n, stop the engine and check If the la the V-b ility is found, see "OTHER TROUB ENGINE OIL PRESSURE CAUTION LA MP lubricating oil pressure has This la mp (5) warns that the engine dropped . When the starting switch i s turned ON, it will light up. When th e lamp goes off after the eng ine is started, the oil pressure is norm Immdediately stop the engine and lo ok for the cause. For details, 16)". see "OT HER TROUBLE (PAGE 3-1 This la When p reheating is carried out with t he glow switch, the lamp will light up in approx. 15 to 45 seconds. The lamp goes out when the glow sw