8 OPERATION OF THE ENGINE 3. Pull the throttle lever all the way back. 4. Insert the key into the starter switch and turn it to position "ON". Alarm Lamp "Engine Oil Pressure" This lamp lights up when there is an abnormality in the engine oil circulation. It lights up when the key is in the "ON" position and goes out as soon as the engine starts running. Should the lamp light up while the engine is running, check the engine oil level. Alarm Lamp "Fuel Level too Low" This lamp lights up when the fuel level in the fuel tank is lower than 2L. The lamp lights up for three seconds to check the dead lamp when the key is in the "ON" position while the engine is stopped.
The lamp goes out when the key is in the "START" position while the dead lamp check is lit. (A) "PREHEAT" (B) "OFF" (C) "ON" (D) "START" Alarm Lamp "Water temperature warning" This lamp lights up if the cooling system gets in trouble while the engine is running. The lamp lights up for three seconds to check the dead lamp when the key is in the "ON" position while the engine is stopped. The lamp goes out when the key is in the "START" position while the dead lamp check is lit. If the lamp stays on with the engine running, interrupt the operation and keep the engine at idling speed for about 5 minutes and then stop the engine. Now check the following points.
(1) Check for cooling water shortage and leak. (2) Check the fan belt for looseness. (3) See if the radiator is covered with mud or dirt. 5. Turn the key to position "Preheat". (approx. 5 seconds) 6. Turn the key to position "Start" and release after the engine has started; it will automatically return to the position "ON". 7. Check if all alarm lamps have gone out. Should an alarm lamp still be lit up, stop the engine and check for the cause. Malfunction Indicator (Quick Diagnosis) Alarm Lamp "Battery Charge" This lamp lights up when there is a malfunction in the electrical system. The lamp lights up when the key is in the "ON" position and goes out as soon as the engine starts.