(3) Measuring clearance between drive shaft and bushing a. Measure the outside diameters of the drive shaft and driven shaft, and replace if the measured values are less than the limit. b. Measure the inside diameter of the pump body bushing to determine the clearance between the bushing and shaft, and compare the measured value with the standard value to determine whether to replace or not. Reassembly (1) For reassembly, reverse the disassembly sequence. 6.3.3. Oil filter ClearanceThe oil filter mounted in this engine is of cartridge type, so it is nec- essary to replace it with a new one at the specified intervals.
Oil filter (Cartridge) Oil filter head EQM4010I Oil filter head ass’y Cartridge EE6OM025 - 159 - MAINTENANCE OF MAJOR COMPONENTS Standard N16.95 ~ N16.968 mm Clearance 0.032 ~ 0.077 mm