2.8. Fan Belt V-belt - Use a fan belt of specified dimen- sions, and replace if damaged, "Y" Press here frayed, or deteriorated. - Check the fan belt for belt tension. If belt tension is lower than the specified limit, adjust the tension by Water pump pulley relocating the alternator. (specified Alternator pulley deflection: 10 ~ 15 mm when Crank pulley pressed down with thumb) V-belt EA9O2006 Poly belt Poly belt will be properly tensioned if the deflection force “F” is applied mid-way between the belt’s tangent S(SPAN) points with the pulley. d T D T = 0.015 x S ( about 1.5 mm per F 100 mm ) C T = 0.015 x *S (mm) EB5O6001 ( T : Deflection, S : Span ) *S = C 2 - (mm) ( D-d ) 2 2 C :
Distance of pulleys (mm), D : Large pulley diameter (mm), d : Small pulley diameter (mm) 2.9. Air Cleaner In case that elements are deformed, crack, replace it. By the definite interval, the elements damaged or if the air cleaner has a must be cleaned and replaced. EFM1002I - 28 - TECHNICAL INFORMATION