3.1.14. Exhaust manifold Release the exhaust manifold fixing bolts, disassemble the exhaust mani- fold, then remove the heat shield and gasket. NOTE : Make sure to release the nuts one after another because the exhaust manifold will be removed if you unscrew two nuts simultaneously. 3.1.15. Thermostat Remove the by-pass pipe connected to the water pump, unscrew the ther- mostat fixing bolts, then disassemble the thermostat housing. Disassemble the thermostat housing and remove the thermostat. Disassemble the water pipe by unscrewing the bolts and nuts installed on the cylinder head. 3.1.16. Starter Unscrew the starter fixing bolts, then disassemble the starter. EAMD017I 3.1.17.
Cooling water pump Remove the water pipe connected to the expansion tank. Remove the water pipe and hoses connected to the water pump. Unscrew the water pump fixing bolts and remove the water pump. - 52 - DISASSEMBLY EAMD014I EAMD014I