3.1.33. Piston and connecting rod Disassemble the pistons by two cylin- ders while turning the crankshaft. Unscrew the connecting rod fixing bolts and take off the pistons and connecting rods in the direction of piston. Remove the piston pin snap rings, take off the piston pin, then discon- nect the connecting rod from the pis- ton. Disassemble the piston rings using ring pliers. Use care not to interchange the dis- Piston ring jig assembled parts and keep them in the sequence of cylinder No. 3.1.34. Cylinder liner Disassemble the cylinder liner using a liner puller. EAMD040I - 57 - DISASSEMBLY EAMD037I EAMD0 37I