If the clearance deviates from the specified range, have the crankshaft journals and pins grind and install undersize bearings. 3) Bearing spread and crush Inspection Check to see that the bearing requires a considerable amount of fin- ger pressure at reassembly opera- tion. O A O B 스프레드 = O A - O B Spread EDM2047I Crankshaft bearing crush Install the bearing and cap in the cylinder block, retighten the bolts to specified torque, unscrew out one bolt completely, then measure the clearance between the bearing cap and cylinder block using a feeler gauge.
Connecting rod bearing crush Install the bearing and cap in the con- necting rod big end, retighten the bolts to specified torque, unscrew out one bolt completely, then measure the clearance between the bearing cap and connecting rod big end using a feeler gauge. EA6M064I EAMD064I - 71 - INSPECTION AND MEASUREMENT EA6MMD006633II EA6MMD006633II Standard 0.11 ~ 0.13 mm Standard 0.086 ~ 0.116 mm