SAFETY PRECAUTIONS SECTION 2 Page 5 GENERAL 1. Turn the electrical master switch to the OFF position. 2. Attach one end of jumper cable to the positive terminal of booster battery and other end to the positive terminal of machine battery. 3 . Attach one end of second cable to the negative terminal of booster battery and other end to the machine's frame away from the battery. 4. To remove cables, reverse above sequence exactly to avoid sparks near the battery. A frozen battery can explode when the booster cables are attached. NEVER check battery charge by placing a metal object across the battery posts. The sparks could cause an explosion. Use a voltmeter or areometer for checking.
Every machine is factory equipped with a fire extinguisher, first aid kit and safety belt. 2.2. BEFORE STARTING THE ENGINE Never start the engine indoors unless proper exhaust ventilation is provided to remove deadly exhaust gases. Once the engine is operating, move the machine outdoors as soon as possible. Exhaust gases are dangerous and can cause unconscious-ness and death. Always place the gear selector in neutral, apply neutral safety lock and lock the parking brake before starting the engine. The operator must be alert, physically fit and free from the influences of alcohol, drugs or medications that might affect his eyesight, hearing, reactions or judgement.
Observe and know the use of alternate exits from the operator compartment. Safety must always be the operator's most important concern. He must refuse to operate when he knows it is unsafe and consult his supervisor when safety is in doubt. The best safety device is a safe operator. Do not use controls or hoses as hand holds when climbing on or off the machine. Hoses and controls can move and do not provide solid support. Movement of the controls may cause inadvertent and unexpected movement of the machine or its equipment. Follow all machine-mounted safety signs before starting, operating, maintaining or servicing the machine.
Be sure the area of the operator's compartment, all mounting steps and grab handles are free of oil, grease, loose objects, ice and mud to lessen the possibility of slipping. Remove or secure all maintenance and personal items so they will not interfere with the operator or jam the controls. Perform a visual check of the machine before starting the engine. Look for such things as improper fluid levels, oil leaks, and loose, damaged or missing parts. Do not start the engine until any unsafe conditions are corrected. Secure all caps and filler plugs. Know and understand the traffic flow patterns of your job and obey flagman, signs and signals. DRESSTA TD-40C