GENERAL INFORMATION Before ordering parts, ALWAYS provide dealer with your product model number and complete serial number information. Before ordering parts, verify correct part numbers and/or serial numbers with your dealer. When using the machine serial number, use the complete number. Some serial number breaks are not available at time of printing. These are listed as & Bel or & Abv or - (thru) The number shown in the quantity column in this manual is the number of parts needed for the illustration on the page. For some parts an “x” will be shown in the quantity column. This “x” indicates that the quantity to be used is “As Needed”.
When references LH (Left Hand) and RH (Right Hand) are used in this manual, it is done from the operator’s seat in the forward operating position. When “See Illustration….” appears in the remarks column, refer to the contents page for the illustration title to find page number location. Some of the illustrations and information found in this parts manual were supplied to Bobcat by machine component companies.
For additional information on the Bobcat website visit www.bobcat.com ABBREVIATIONS SALES = Order from Gwinner Sales Department PM = Parts Manual NSS = Not Serviced Separately S/L = Service Letter NAP = Not Available as Parts W/ = With BTI = Bobcat Technical Information Bulletin W/ O = Without OM = Operation & Maintenance Manual ID = Inside Diameter SM = Service Manual OD = Outside Diameter AHC = Advanced Hand Controls “ = Inches ACS = Advanced Control System ‘ = Feet SJC = Selectable Joystick Controls MM = Millimeters TRANSLATION KITS & DECAL KITS AR = Argentina (Spanish) BR = Brazil (Portugese) JP = Japanese (Translation Kit includes Safety Manual, Operators Manual & Decal Kit) DISPOSITION (Found in the Remarks Column) [A] = Use Up [B] = Use Up on Other Applications [C] = File PDR Report with Bobcat Parts Sales [D] = Part Number Error Page 2 - OSS# 2071349 - All rights reserved by Bobcat Company - 12/01/2009 - 20:50:59 - Produced by Ken Cook Co.
with media1off