. SAFETY SAFETY MACHINE OPERATION SAFETY SAFETY MACHINE OPERATION equipment keep the with low that the a slope, PROHIBITED OPERATIONS Never dig the work face under an overhang. There is a hazard that rocks may fall or that the overhang may collapse and fall on top of the machine. 2 - 24 When traveling up a ste ep slope, extend the work equi the front to improve th e balance, keep the work eq approximately 20 to 30 travel at low speed. When traveling downhi travel lever close to the n eutral position, and travel at lo Always travel straight up or down a slope. Traveling at or across the slope is e Do not turn on slopes or to a flat place to change on to the slope again.
Travel on grass, fallen speed. Even with sligh machine may slip. If the engine stops whe move the control levers immediately to the neutral posi start the engine again. OPERATIONS ON SLOPES When working on slope s, there is a hazard that the ma chine may lose its balance and turn over when the swing or work equipment are o perated. This may lead to serio us injury or property damage, so always provide a stable place when carrying out these operations, and operat Do not swing the work downhill side when the dangerous, and may ca If the machine has to be equipment from the uphill sid bucket is loaded. This ope use the machine to tip over. used on a slope, pile the soil