. OPERATION DETAILED CONTROLS AND GAUGES Meter Display Portion D(1) D(2) D(3) D(4) D(5) Engine pre-heating monitor Swing lock monitor Wiper monitor Auto-deceleration monitor Working mode monitor D(6) D(7) D(8) D(9) D(10) Travel speed monitor Engine water temperature gauge Fuel gauge Hydraulic oil temperature gauge Service meter Pilot Display When the starting switch is ON, the pilot display lights up when the display items are functioning. Engine Pre-heating Monitor Monitor lamp (1) indicates pre-heating time required when starting the engine at an ambient temperature below 0 ° C (32 ° F).
The monitor lamp lights when the ignition switch is turned to the HEAT position and flashes after 30 seconds to show pre-heating is completed. (Monitor lamp will go off after 10 seconds.) 3 - 14