. OPERATION DETAILED CONTROLS AND GAUGES Wiper Switch This switch (4) actuates the front window wiper. Each time the switch is pressed, it changes ON INT stop (OFF). Monitor display portion (A) ON lighted up: Wiper moves continuously Monitor display portion (A) INT lighted up: Wiper moves intermittently Monitor display portion (A) OFF : Wiper stops Komatsu distributor change the setting. 3 - 22 REMARK Each time wiper switch (4) is the center of display portion operated, the mode is displayed in (A). The screen returns to normal screen after 2 seconds.
If the wiper does not work w hen switch (4) is turned ON, wiper setting on the monitor is probably not correct, have your Window Washer Switch This switch (5) is kept continuo usly pressed, window washer fluid is sprayed out on the front glass . When the switch is released, the spray stops. If switch (5) is kept pressed when the wiper is stopped, the ay out, and at the same time, the window washer fluid will spr wiper will be actuated continu the wiper will continue to ope ously. When switch (5) is released, rate for 2 cycles, then stop.
If the wiper is moving intermit continuously, window wash tenly and switch (5) is kept pressed er fluid will spray out, and at the same time, the wiper will be a ctuated continuously. When switch (5) is released, the wiper wil l continue to operate for 2 cycles, eration. then return to intermittent op