Safety Section Operator Restraint System (If Equipped) Warning Signs and Labels Your DOOSAN lift truck has the following tipover warning decals. Make sure that you can read all safety signs. Clean or replace these if you cannot read the words or see the pictures. When cleaning the labels use a cloth, water and soap. Do not use solvent, gasoline, etc. You must replace a label if it is damaged, missing or cannot be read. If a label is on a part that is replaced, make sure a new label is installed on the replaced part. See you DOOSAN Lift Truck dealer for new labels.
The most effective method of preventing serious injury or death to yourself or others is to familiarize yourself with the proper operation of the lift truck, to be alert, and to avoid actions or conditions which can result in an accident. The "Survive in tipover" warning is located on the overhead guard. It shows the proper use of the operator restraint system. Seat Adjustment Tipover can occur if the truck is improperly operated. In the event of tipover, injury or death could result. Move the lever, slide the seat to the desired position, and release the lever. Adjust the seat before operating the lift truck. After adjusting, set the seat to make sure it is properly locked.
Do not adjust the seat while the truck is in motion. Do not place your hand or fingers under the seat. Injury may occur as the seat moves up and down. 17 WARNING WARNING