Komatsu — CRUSHING OR CUTTING PREVENTION

. SAFETY GENERAL PRECAUTIONS off a moving machine. This may cause serious injury. 2 - 11 HANDRAILS AND STEPS To prevent personal injury caus ed by slipping or falling off the machine, always do as follo Use the parts marked by arr on or off the machine. Never use the parts marked the machine. Use them only track or when checking or ca side cover, or when filling the Never jump on or off the mac To ensure safety, always face the machine and maintain and one hand, or both hands and nd steps (including the track shoe) ourself. rs, or work equipment lock lever achine. ood or covers where there are no machine, check the handrails and oe).

If there is any oil, grease, or s (including the track shoe), wipe it ep these parts clean. Repair any e bolts. hine while holding tools in your hand. three-point contact (both feet one foot) with the handrails a to ensure that you support y Do not grip the control leve when getting on or off the m Never climb on the engine h non-slip pads. Before getting on or off the steps (including the track sh mud on the handrails or step off immediately. Always ke damage and tighten any loos Do not get on or off the mac hine while holding tools in your hand. MOUNTING AND DISMOUNTING chine. Never get on or off a moving machine.

Never jump on or off the ma If the machine starts to move when there is no operator on the machine, do not jump on to the machine and try to stop it. NO PEOPLE ON ATTACHMENT S Never let anyone ride on the wor k equipment,or other attachments. There is a hazard of fallin g and suffering serious injury. CRUSHING OR CUTTING PREV ENTION The clearance around the work equipment will change according to the movement of the link . If you get caught, this may lead to serious personal in jury. Do not allow anyone to approach any rotating or telesc oping part.