. OPERATION EXPLANATION OF COMPONENTS REMARK When canceling the shift hold, operate the directional lever or shift mode selector cancel the hold shift by Position (A): (OFF) Stop Position (B): (INT) Intermittent wiper Position (C): Low-speed wiper Position (D): High-speed wiper 3 - 47 REMARK When cancelin g the kick-down, operate th e directional lever. In manua l shift, the kick-dow n can be cancel ed by operating the g the starting sw earshift lever to any positio n other than 2nd. It is also possible to cancel the kick-down by tu rning itch OFF. In auto-shift, if the travel speed becomes high after th e kick-down, the gear will be shifted up by the auto-shift.
In auto-shift, w hen traveling at more than 1 8 km/h (11. 2 MPH ) in 3rd or at more than 28 km /h (17.4 MPH) i n 4th, even if the kick engine. -down switch is pressed, the transmission will not shift down. This is to prevent overrun of the he transmission wil hift f the HOLD SWITCH To fix the speed r ange when traveling in automatic transmissio press switch (15) at the side of the lift arm co ntrol lever knob. Th transmission will be fixed in the speed range displayed on sh e machine monitor and shift hold pilot lamp ( s pressed again, the display goes out. e displayed on sh indicator (A) on th will light up.
When the switch i s pressed again, the displa Use this function t o select the desired speed range when travelin up or down hills o r when carrying out operati ons such as gradin gearshift lever or switch to MANUA operate the transmission turning the startin FRONT WIPER SW ITCH When rotary switc h (E) of this switch (16) is tu rned, the front wip will move. If push button (F) i s pressed, washer liquid wil l be sprayed out on the front glass wh ile the button is being pres sed. It is possible to ch eck the position of the swit ch in display windo (G).