. OPERATION EXPLANATION OF COMPONENTS OPERATION EXPLANATION OF COMPONENTS REMARK REMARK The 1st position for the gearshift lever fixes the transmission in 1st. There is no automatic shifting of the transmission. When shifting down from 2nd to 1st, press the kick-down switch on the lift arm control lever. If the transmission is in auto-shift and the travel speed is below 10.5 km/h (6.5 MPH) in any speed range when traveling in either forward or in reverse, the kick-down switch is actuated and makes it possible to shift down to 1st. This makes it easy to carry out load and carry operations.
Even if the travel speed is more than 10.5 km/h (6.5 MPH), this switch can be used to shift the transmission down. Each time the kick-down switch is pressed, the speed range will shift down one range at a time (when in 4th: F4 -> F3 -> F2; when in 3rd: F3 -> F2). 3 - 55 The lever length can be set to 3 levels ( positions (A), (B), and ( C)). For adjustment, consult your Komatsu distributo (Th e leve r is installed to position (B) when delivered. AUTOMATIC SHIF T shifting can be carried out in the 2nd through 4th Automati c gear shifting out in 4th speed range of t he four forwar d and reverse speeds d ependin g on the travel conditions. Position ( a): 1st Position ( b): 2nd Position ( c):
3rd Position ( d): 4th The rang e of speeds during a utomatic gear shifting i s determined by t he position o f the gearshif as shown in the on the righ Gear shift lever positions Speed range 2nd 2nd 3rd 2nd 3rd 4th 2nd 3rd 4