. OPERATION EXPLANATION OF COMPONENTS LIFT ARM CONTROL LEVER NOTICE BRAKE PEDAL WARNING Do not put your foot on this pedal unless necessary. to stop the machine while 3 - 58 This lever ( 6) is used to operate t Do not use th e FLOAT position when l owering the bucket. U se the FLOAT position whe n leveling, see "LEVELIN G OPERATIONS (PAG E 3-142)". Position (a) : RAISE When the lift arm co the RAISE position position until the lift a the kickout, and the position. : HOLD ntrol lever is pulled further from rom , the lever is stopped in this rm reaches the pres et positio n of lever is returned to the HOLD the same position. eely under external force.
Position (b) The lift arm is kept in Position (c) : LOWER : FLOAT Position (d) The lift arm moves fr eely under external force When trav eling downhill, always u se the right brake pedal, and use the braking fo Do not us rce of the engine togethe e the brake pedal repeated r with the brake. ly more than necessary. If the brake is used t oo frequently, the brake will overheat. If this happens, brakes wi ll not work, so this may le These ped als (7) operate the bra RIGHT AND LEFT BRAKE PEDAL e wheel brakes. mal braking operations.
The right br ake pedal operates th Use the rig ht brake pedal for nor mal braking operatio When the tr ansmission cut-off swi tch is at the ON position, the brakes are applied, and the tr ansmission is returned to Neutral a t the same time. ransmission cut-off sw Neutral. itch is at the OFF position, the brakes are applied, but the transmission is not When the t returned to osition, the REMARK g the brake and accelerator together to reduce the machine travel speed or to s When usin rator together to re duce the carrying ou t operations, set the tr ansmission cut-off s witch to the ON position and use the b