. OPERATION EXPLANATION OF COMPONENTS REMARK 3 - 76 LISTENING TO RA 1. Turn the starti ng switch ON, then turn power 2. Use band sel ector button (2) to select MW (A M), FM1 or FM2. 3. Select the sta tion with the preset buttons (3). In case you do no t promptly remember the numb er assigned to a certain preset sta less than 0.5 seco tion, press auto-store/preset sc nd. The preset 6 stations will br an button (4) for oadcast one after another for 5 seco nds each. When the desired st ation broadcasts, press the button a 4. If you want to tune in to a station that is not p reset, use either seek tuning b utton (5) or manual tuning butto 5. Adjust the vol ume, balance, and tone as des 6.
When turning until it clicks. REMARK To switch to th e radio when listening to a cas sette, press the cassette eject button to stop If you insert a cassette when listening to the r adio, the tape wil l start to play. LISTENING TO CA SSETTE TAPE ng switch ON, then turn power switch (1) ON. 1. Turn the starti 2. Set the casse right side and automatically If the arrow i right, the top s left, the botto When the tap and the other 3. When finished eject the tape 1. Turn the starti ng switch ON, then turn power 2. Set the casse tte with the exposed portion o m side is being played. e reaches the end, it is autom side starts to play. atically reversed 3.
When finished with the tape, press the casset te eject button to and automatically switch to the radio.