. OPERATION OPERATION Tightening torque for portion B: 11.8 to 19.6 Nm (1.2 to 2.0 kgm) WARNING Even if there appears to be no abnormality with the seat belt, replace it once every three years. If the belt is damaged or fluff is starting to form, or if there is any damage or deformation of the seat belt holders, replace the seat belt. 3 - 100 9. Che ck for damage to gaug es, lamps on the instrument p anel and loose bolts. Che on t ck for damage to the pa nel, gauges and lamps. If any problem is found, replace the parts. Clean off an y dir he surface. Tighten any loose bolts. 10. Che ck for loose air cleaner ck for the loose bolts. If 11. Che ck for loose battery ter ten any loose terminal.
tening torque for portio n A: 5.9 to 9.8 Nm (0.6 to 1.0 kgm) 12. Che ck for damage to the se at belt and mounting cl amps REMARK The dat e of manufacture of the s eat belt is marked on th e belt at the place in dicated by the arrow in the diagram on the righ Check t hat there are no loose b olts on the equipment m ountin g the seat bel t to the machine, and ti ghten if necessary. Tighten ing torque: 24.5 ± 4.9 N m (2.5 ± 0.5 kgm, 18.1 ± 3.6 13. Cle an cab window. Cle the an the cab window to en sure good visibility whe n operating machine.