. OPERATION OPERATION ADJUST SEAT BELT Always wear the seat belt. WARNING is worn or damaged, replace it. the belt on both the buckle and the belt at 90 3 - 112 Before fastening the seat belt, check that there i s no abn ormality in t he belt-mounting b racket or mou nting of the belt. If th e bel Fasten the seat belt before starting operations Always wear the sea t belt during operations. Make sure that the le ft and right belts are not t wisted w hen fastening t he seat belt FASTENING AND REMO VING BELT at it is tight without being too tight. epress the brake pedal fully, and adjust the back is pressed against the backrest. Fasten the belt so th at it is tight without bein g too ti 1.
Sit on the seat, d seat so that your 2. After adjusting th the tether belt an seat. 3. Sit on the seat, h right hands, inse to check that it is 1. Sit on the seat, d epress the brake peda l fully, back is pressed agains t the b ackrest. 2. After adjusting th e seat position, adjust tether b elt (1). Tense d install it when there is no one sitting on the 3. Sit on the seat, h old buckle (2) and tongu e (3) wit h your l eft and rt tongue (3) into buckle (2), the n pull t he bel securely locked. 4. When removing t he belt, press the red b utton in buckle (2 ) to free the belt. Fasten the belt a tongue sides so t long your body withou t kinkin g it.
Adjust th e l engths of t hat the buckle is locate d at the front, mid-poin t of your ADJUST BELT LENGTH To make belt shorter : Pull the free end of th e tether To make belt longer: degrees to the holder, and pul