. OPERATION OPERATION ADJUSTING WORK EQUIPMENT POSTURE WARNING position. 1.8 lbft) lever. Check that the lever is automatically 3 - 147 Stop t he machine on flat ground and put blocks in front of and behind the tire Set the s. parking brake switch to the ON position (A) to apply the parking brake. Set th e frame lock bar to LOCK p osition (L) to lock the front and rear frames . s attach a warning sign to the work equipment control levers. go under the work equipment when the arm is raised. Alway s attach a warning sign to th e work equipment control l Do not go under the work equipm ent when the arm is raised.
The boo m kickout makes it possi ble to set the bucket so that it automatically stops at the desired lifting height (lift arm high er than horizontal) and t he bucket positioner ma kes it possible to set the bucke t so that it automatically nditions. stops at the desired digging angl e. The setting can be ad justed to match the working co ADJUSTING BOOM KICKOU 1. Rais e the bucket to the des rol lever to the HOLD pos ition, set the work equipm entlock r to the LOCK position, t hen stop the engine. just plate (2) so that the nter of the sensing su 2. Loos en two bolts (1), and ad is in line with the ce rface of imity switch (3). Then tig hten the bolts to hold the plate in 3.
Loos en two nuts (4) to make a clearance of 3 to 5 m m (0.118 .197 in) between plate (2) and the sensing su rface of imity switch (3). Then tig hten the nuts to hold in position. tening torque: 17.2 ± 2.5 4. After ned to HOLD when the b ucket reaches the desir ed height