. ATTACHMENTS, OPTIONS HANDLING JOYSTICK STEERING SYSTEM When joystick ON/OFF switch (1) is turned ON, it becomes *: Does not shift up above speed range of gearshift lever. 6 - 10 STRUCTURE AND FUNCTION OF JOYSTICK STEERING The joystic k steering system is a system use loaders wi th a lever instead o f a steering whee The joystic k enables steering with small, light movements, and helps to re duce operator fatig possible to o perate the steering with the joystick. Before turnin g this switch (1) ON , adjust t he positi on of the j oystick console and check that there is no play i n the co When the joy stick steering is in use, the joystick pilot lamp on the machine mon itor lights up.
nes equipped with the joystick steering system, it is On machi is possible to use joystick ON/O FF switc h (1) to s elect the s teering and transm ission operation m ethod as shown in the table below.
The differ ences between o peration using t he joystick and operation using the steering w heel are as follo Selection Operation using joystick Operation using steering wheel Joystick ON/OFF switch ON OFF Steering Steering using joystick (steering with steering wheel is also possible) Steering using steering wheel Transmissio Changing direc Transmission a shift/manual s selector switc n Selection of sp range Operation using directional tion selector switch at top of joystick Operation using transmission directinal lever uto hift Manual h Auto (L,H) Manual Auto (L,H) Speed range selection using shift up, shift eed down switches at top of joystick* 1st - 3rd Automatic gearshifting according to travel speed 2nd - 3rd Operation using gearshift lever 1st - 4th Automatic gearshifting according to travel speed 2nd - 4th