Group 43 MID 130 Transmission Control Unit, Fault Codes MID 130 PID 33 Clutch Cylinder, Position 12 Type of fault: FMI Description: Fault Condition: Possible Symptoms: Possible Cause: FMI 2 • Data erratic, intermittent, or incorrect • The difference between clutch positions indicated by the sensor signal (SEPoC) and the inverted sensor signal (SEPoCINV) is to large and both signals are within normal range • Yellow lamp is sent • Slow clutch performance • Rough shifting at start and at slow speed • Slow gear changes • N/A FMI 3 • Voltage above normal, or shorted to high source • Sensor signal is short circuit to UBATT or sensor supply when:
at least one of the sensor signals is above normal range • Yellow lamp is sent • Slow clutch performance • Rough shifting at start and at slow speed • Slow gear changes • N/A FMI 5 • Current below normal or open circuit • Open circuit on any of the sensor signals is detected when: one of the sensor signals is within normal range and the other sensor signal is below normal range • Open circuit on ground is detected when both the sensor signals are within the normal range and the sum of the sensor signals is above a specific value • Yellow lamp is sent • Slow clutch performance • Rough shifting at start and at slow speed • Slow gear changes • N/A