Group 43 MID 130 Transmission Control Unit, Fault Codes MID 130 PID 36 Clutch Wear, Status MID 130 PID 37 Air Pressure, Transmission MID 130 PID 65 Brake Switch 14 Type of fault: FMI Description: Fault Condition: Possible Symptoms: Possible Cause: FMI 0 • Data valid but above normal operational range • The clutch wear is more than or equal to "SERVICE DUE POSITION" • Yellow lamp is sent • If active for a long period of time the clutch may completely wear out and fail • N/A Type of fault: FMI Description: Fault Condition: Possible Symptoms: Possible Cause:
FMI 0 • Data valid but above normal operational range • Sensor signal is in normal range • Pressure is above 145 PSI (10.0 bar) • Yellow lamp is sent • Slow clutch performance • N/A FMI 1 • Data valid but below operational range • Sensor signal is in normal range • Pressure is below 72.5 PSI (5.0 bar) • Yellow lamp is sent • The symbol for compressed air, transmission is sent • Gear changes may be absent • Slow clutch performance • N/A FMI 3 • Voltage above normal or shorted high • The sensor signal is above normal range • Yellow lamp is sent • N/A FMI 5 • Current below normal or open circuit • The sensor signal is below normal range • Yellow lamp is sent • N/A Type of fault:
FMI Description: Fault Condition: Possible Symptoms: Possible Cause: FMI 14 • Special Instructions • The gear lever is moved from neutral or “FOLD” position without prior application of the service brake • White lamp is sent together with pop up message • The transmission will not engage the selected gear (stays in neutral) • N/A