Group 43 MID 223 Gear Selector Control Unit, Fault Codes MID 223 PSID 9 Gear Selector, Position MID 223 PSID 36 Relay Power Supply 56 Type of fault: FMI Description: Fault Condition: Possible Symptoms: Possible Cause: FMI 12 • Faulty device or component • The sensor signals do not correspond with valid value • Yellow lamp is sent • Some or all stalk actions are not working • It is not possible to select gear • N/A Type of fault: FMI Description: Fault Condition: Possible Symptoms: Possible Cause:
FMI 7 • Mechanical system not responding properly • The relay does not release • Yellow lamp is sent • Fault displayed after ignition OFF • Risk of battery discharge if main circuit breaker is not opened when vehicle is not used • N/A FMI 12 • Faulty device or component • 0 voltage at Pin 1 • It is not possible to drive the vehicle • N/A