. OPERATION TROUBLESHOOTING STARTING THE ENGINE CAUTION DISCONNECTING THE BOOSTER CABLES terminal of the problem machine. 3 - 135 Make sure tha t the parking b rake switch i s at PARKIN G position a nd th e gear shift lever is at N (n eutral) position for both normal machine a nd t he problem m 1. Mak e sure t he clips a re firmly connected to the batter y terminals 2. Start engine of the no rmal machine and run it at high i dle s peed. 3. Turn the starting swit ch of the problem mac hine to the START position and start t If the engine doesn't start at first, try again after 2 minutes or so.
After the engine has starte d, disconnect the boo ster cables in th e reverse of the order in which they were connected. 1. Remove on e clip of b ooster cabl e (B) from t he engine block the p roblem machine 2. Remove the other clip of booster cable (B) fr om the negative terminal of t he norma l machine. 3. Remove on e clip of terminal of t he norma l machine. 4. Remove the other clip of booster cable (A) fr om the positive