Introduction The unit versions are consecutively numbered start ing at 1 * that is, each version has its own cods num ber. The unit designation of each page is additionally placed under head of each page. A separating sheet and a detailed list of contents is located in front of each unit. Output in kW kilowatt Former unit HP horsepower 1kW = 1.360HP 1 HP = 0.735kW Torque in Nm newtonmeter. Former unit kpm kilopondmeter lNm = 0.lOl972kprn The sections which are valid for all unit versions are covered in version 0. 0.102 kpm 981 Nm 1 kpm = 9.80665Nm The data adjusting data, tightening torques, machin ing dimensions, etc. and special tools are separately listed in front of each unit version.
Pressure in bar Bar Former unit kp/cm2 kilopond per square centimeter 1 bar = 1.019 716 kplcm2 1.020 kp/cm2 The numerical values expressed in SI-units based on the new international unit system have been converted and rounded off acc. to DIN 1335. 1 kp/cm2 = 0.980 665 bar 0.981 bar The specified part numbers, as well as the fig. number in exploded views are serving only for identification and better differentiation of the individual versions. When ordering spare parts, always use the part num bers from valid microfiches. The pressure data specified in bar are gauge pressures. We shall do our best to keep this workshop manual continuously up to date by means of additional sup plements.
Daimler-Benz Aktlenges.llschaft Werk Gaggenau UNIMOG-Kundendienst