. SAFETY PRECAUTIONS FOR OPERATION 2 - 26 PRECAUTIONS WHEN TRAVELING t operations, always keep a safe distance from people, structures, or other contact with them. und, keep the work equipment ve the ground. Otherwise, the o the ground and the machine oor, raise the boom to ensure an auto-deceleration system, n switch OFF when traveling on If the machine is operated with N, the engine speed will rise and uddenly become faster. when possible. If the machine keep the work equipment close speed. There is more danger of left or right than tipping over to over obstacles which make the r right sides.
, travel at low speed and do not here is danger that the machine ent may hit the ground surface ts balance, or may damage the a. When traveling or carrying ou machines to avoid coming into When traveling on the level gro approximately 40 to 50 cm abo work equipment may contact t may be turned over. If the view to the right side is p better visibility. For machines equipped with always turn the auto-deceleratio rough ground or steep slopes.
the auto-decelerationsystem O the machine travel speed may s Avoid traveling over obstacles has to travel over an obstacle, to the ground and travel at low the machine tipping over to the the front or rear, so do not travel machine tilt strongly to the left o When traveling on rough ground operate the steering suddenly. T may turn over. The work equipm and cause the machine to lose i machine or structures in the are When using the machine, to pre vent personal injury caused by damage to the w ork equipm ent or b y the m achine overturning due to overloading , do not exceed the permitted performance of the machine or the maximum of the machine.
he ximum permitted load for the structure When passing over bridges or s tructures, check first that the structure i s strong enough to support the we ight of the machine. When operating in tunnels, unde r bridges, under electric wires, or other p laces w here the hei ght is li mited, o perate slowly and be extremely careful not to let the machine body or work equipment hit anythin g.