. OPERATION DETAILED CONTROLS AND GAUGES Select Switch These switches (7) are used when adjusting the E mode set values adjusting the oil flow when an attachment is installed. are adjusted, the engine output is adjusted, making it possible to fuel the (The selected monitor is highlighted in black.) set fuel fuel 3 - 28 or when Adjusting E Mode Set Values When the E mode set val consumption in E mode. 1. Press se lector switch ( prove the 2. The mon shown o itor display s n the right. creen switches to the selection scr Use UP s set value change. witch (9) and DOWN switch (10) to select the E m s (A), then press Enter switch (11) to accept 3. The mon shown o itor display sc n the right.
reen switches to the adjustment scr Use UP values. The relat as follow E0: Defa cons E1: Econ E2: Econ cons E3: Econ to fu Use UP values. switch (9) and DOWN switch (10) to select the ionship between fuel consumption and productio s. The relat as follow E0: Defa ult (maximum emphasis given to production over umption) E1: Econ E2: Econ omy mode ad omy mode umption) justment 1 adjustmen E3: Econ omy mode a mphasis gi el consumptio n over productio n) REMARK The closer t he selection is made to E3, the better the The consumption becomes, bu t the production i s reduc ed accordin 4. Press en ter switch (11 ) to accept the s et value