Argo Service Manual General Information Argo Torque Specifications Parking Brake/Band Brake Mounting Bolts (HDi).........22FT.LBS. 30.0Nm Service Brake Caliper Bolts (HDi)..................................25 FT.LBS. 20.3Nm Brake Disc to Output Shaft.............................................30FT.LBS. 40.7Nm Brake Sprocket to Disc (Avenger earlier models)...........15 FT. LBS 20.3Nm Master Cylinder Lid Screws...........................................Snug By Hand Upper Handle Bar Clamp Bolts .....................................12 Ft. LBS 16.3Nm Steering Shaft Nut................ ....................................... Tighten snug. Back off until lower washer can be turned by hand.
Ensure shaft can be turned with minimal end play Vehicle Body and Firewall Hood Hinge Mounting Bolts...........................................Snug By Hand Rear Seat Mounting Bolts...............................................Snug By Hand Trailer Hitch Mounting Bolts..........................................35 FT. LBS. 47.5Nm Frame and Drive System Wheel Nuts......................................................................45 FT. LBS. 61.0Nm Bearing Extensions.........................................................30 FT. LBS. 40.7Nm Bearing Extension C/Bolts.............................................240 IN. LBS. 27.1Nm Bearing Extension Flange Nuts ...................................
30 FT. LBS. 40.7Nm Bearing Extension Flange Bolts (2010 +)...................... 30 FT. LBS. 40.7Nm Axle Flange Bolts...........................................................30 FT. LBS. 40.7Nm Axle Sprocket Retaining Screws................................... 144 IN. LBS. 16.4Nm Axle Bearing Set Screws............................................. 10-15 IN. LBS. 11.1-Nm Idler Shaft Bearing Set Screws (outer)......................... 10-15 IN.LBS. 11.1-Nm Axle Retaining Bolt........................................................35 FT. LBS. 47.5Nm Wheel Stud Extensions...................................................45 FT. LBS.
61.0Nm Idler Shaft Coupler Bolts (HDi).....................................22 FT.LBS. 30.0Nm Fuel System and Seat Assembly Handrail Assembly to Upperbody Hand Tight Approx..48 IN. LBS 5.4Nm Backpad to Handrail Assembly.......................................72 IN.LBS 8.1Nm Seat Frame Assembly to Body........................................Snug By Hand GI-11 Ontario Drive & Gear Limited www.argoutv.com PH.(519)- 662-2840 FAX (519)- 662-2421