ADULT SECTION Maintenance Handlebar Adjustment 6. Slide the handlebar pad upward to access the adjuster bolts. If additional room is required, unzip one of the handlebar pad zippers and roll the pad to the side. 7. To adjust, remove the upper flange nut and carriage bolt. 8. Loosen the lower flange nut only enough so the bracket can move freely. 9. Position the handlebar to the desired height and re-install the upper carriage bolt and flange nut. 10. Torque the flange nuts to 15-17 ft. lbs. 11. Reinstall the handlebar pad. 75