49 PERIODIC SERVICE B Checking Coolant Level B Cleaning Radiator Screen To avoid personal injury: A Do not remove radiator cap while coolant is hot. When cool, slowly rotate cap to the first stop and allow sufficient time for excess pressure to escape before removing the cap completely. To avoid personal injury: A Be sure to stop the engine before removing the screen. 1. Park the vehicle on a flat surface. 2. Remove the radiator cover. 3. Detach the screen and remove all foreign materials. 1. Park the vehicle on a flat surface, raise the cargo bed, mount the safety support and shut off the engine. 2. Check to see that the coolant level is between the "FULL" and "LOW" marks of recovery tank.
3. When the coolant level drops due to evaporation, add water only up to the full level. In case of leakage, add anti-freeze and water in the specified mixing ratio up to the full level. (See "Flush Cooling System and Changing Coolant" in "EVERY 2 YEARS" in "PERIODIC SERVICE" section.) (1) Radiator screen (A) "DETACH" A Radiator screen must be clean from debris to prevent engine from overheating. (1) Recovery tank (A) "FULL" (B) "LOW" A If the radiator cap has to be removed, follow the caution above and securely retighten the cap. A Use clean, fresh water and anti-freeze to fill the recovery tank. A If water should leak, consult your local KUBOTA Dealer.