PERIODIC SERVICE 74 B Replacing Fuse The vehicle electrical system is protected from potential damage by fuses. A blown fuse indicates that there is an overload or short somewhere in the electrical system. If any of the fuses should blow, replace with a new one of the same capacity. A Before replacing a blown fuse, determine why the fuse blew and make any necessary repairs. Failure to follow this procedure may result in serious damage to the vehicle electrical system. Consult your local KUBOTA Dealer for specific information dealing with electrical problems. (1) Fuse puller (2) Fuse C Replacement procedure 1. Disconnect the negative cable of the battery. 2. Remove the fuse box cover. 3.
Pull out the blown fuse using FUSE PULLER in the fuse box. 4. Insert a new fuse into the fuse box. 5. Install the fuse box cover. 6. Connect the negative battery cable. C Protected circuit (1) Fuse box cover (2) Slow-blow fuse box cover Fuse No. Capacity (A) Protected circuit 1 Slow-blow fuse (60) Alternator 2 Slow-blow fuse (50) Key switch 3 10 Alternator, Fan motor relay 4 5 Panel 5 30 Radiator fan 6 10 Horn 7 15 (Work light) 8 15 Head light, Tail lamp 9 5 Eng. Stop Solenoid relay 10 5 Glow lamp 11 20 Eng. Stop Solenoid 12 10 12V DC output 13 15 Brake lamp, (Hazard) 14 30 Spare 15 --- Fuse puller 16 5, 10, 15, 20 Spare