OM3212 08/11 Operator Cab and Controls - Section 32 Page 32-35 These two displays will alternate every second. The other displays, gauges and pilots will function as nor- mal. If more than two codes are present at the same time, the highest priority action code will be dis- played. That priority is as follows: 04; 06; 05; 07; 03; 02; 01. Cancellation of Action Code If either of the following requirements is satisfied then the action code will be canceled. 1. If the fault which caused the action code is no longer present, then the action code will be can- celed automatically, and the same, or next prior- ity action code will be displayed automatically, if there are any other active faults.
After the operator has been informed of the fault code, the action that should be taken is as follows: 1. Stop the truck in a safe location. 2. If the fault remains, the action code can be can- celed by a qualified technician who is trained to monitor the system. 2. Apply the parking brake. 3. Confirm the presence of the fault code and the action code. 4. Follow the instructions of the action code. 5. Notify a qualified technician for repairs. The possible action codes are as follows:
CODE DESCRIPTION 01 Notify maintenance at shift change 02 Notify maintenance right now 03 Reduce engine / machine speed 04 Stop safely now / shut off engine 05 Stop with engine at mid speed 06 Start engine and keep at low idle 07 Keep body seated